Pioneer Multi Projection System RM-V1000NU - Manual (Page 90)

89
ADJUSTMENTS
[3] Adjusting the H SIZE
1) Enter the adjustment mode.
2) Press the 3 key to select [3. DEFLECTION ADJ].
3) Press the 5 key to select [H SIZE]. Then use the
2
/ –
and /
3 +
keys to adjust the H SIZE.
The following can be adjusted using similar methods.
0 key : V STATIC 7 key : H BLK-L
2 key : V SIZE 8 key : H BLK-R
3 key : V MID SIZE 9 key : V MID LINEARITY
5 key : H SIZE B key : H PIN
6 key : V LINEARITY D key : GH LINEARITY (is the same as GH LINEARITY in “4. CONVERGENCE ADJ”.)
[4] Adjusting the green horizontal size (GH SIZE)
1) Enter the adjustment mode.
2) Press the 4 key to select [4. CONVERGENCE ADJ] .
3) Press the
G
ADJ
ON/OFF
key until the OSD display becomes [GH].
The following can be adjusted in the same way.
R
ADJ
ON/OFF
key : RH RV
B
ADJ
ON/OFF
key : BH BV
4) Press the 2 key until the OSD display becomes [SIZE].
Then use the
2
/
–
and /
3 + keys to adjust the GH SIZE.
The following can be adjusted in the same way.
1 key : STATIC
2 key : 3 SIZE 3 MID SIZE 3 5D SIZE
3 key : 3 LINEARITY 3 MID LINEARITY 3 6D LINEARITY
4 key : 3 SKEW 3 3D SKEW 3 5D SKEW
5 key : 3 KEY 3 MID KEY 3 3D KEY 3 MID 3D KEY
6 key : 3 SUB KEY 3 MID SUB KEY 3 3D SUB KEY 3 MID 3D SUB KEY
7 key : 3 BOW 3 4D BOW 3 6D BOW
8 key : 3 PIN 3 MID PIN 3 4D PIN 3 MID 4D PIN
9 key : 3 SUB PIN 3 MID SUB PIN 3 4D SUB PIN 3 MID 4D SUB PIN