NEC 5224 - Manual (Page 44)

38
4. Press the Okay softkey.
To log out of Hot Desking 5224 IP Phone (the phone must be idle):
1. Press the HotDesk softkey.
2. Press the Logout softkey.
3. Press the Confirm softkey.
Note: Your profile can only be active on one phone at a time. If you log in from another phone
without logging out from the first one, the system will automatically deactivate your profile on
the first phone.
Hot Desk Remote Logout
A user who has forgotten to log out of a Hot Desking phone can be logged out using any phone
that supports Hot Desk Remote Logout.
To remotely log out a Hot Desking phone:
1. Dial 111.
2. Dial the Hot Desk User Extension Number that you want to log out.
Tag Call
Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the
tag, your system administrator or telephone company can identify the source of the call and
provide this information to appropriate personnel or authorities. CAUTION: Tagging a non–
malicious call may result in fines or other penalties.
To tag a malicious call:
• Press the Tag Call feature key while the call is in progress. See "Feature Keys"
elsewhere in this guide for information on programming a Tag Call feature key to your
phone. –OR–
• Press
( TRANS/CONF ) and dial *55.
If the call was successfully tagged "Thank You" is shown on the display; otherwise, "Not
Allowed" is displayed. Note: Tag Call can be used on active two–party calls only. Calls on hold
and conference calls cannot be tagged.