Nortel Networks ALTEON OS BMD00007 - Manual (Page 122)

Alteon OS Command Reference
122 „ The Information Menu BMD00007, November 2007
/info/transcvr
Fiber Port Transceiver Status
This command displays the status of the Small Form Pluggable (SFP) transceiver module on each Fiber
External Port.
/info/dump
Information Dump
Use the dump command to dump all switch information available from the Information Menu
(10K or more, depending on your configuration). This data is useful for tuning and debugging
switch performance.
If you want to capture dump data to a file, set your communication software on your worksta-
tion to capture session data prior to issuing the dump commands.
Port Device TX-Enable RX-Signal TX-Fault
---------- ------ --------- --------- --------
19 - EXT3 SR-XFP enabled LOST N/A <= XFP NOT APPROVED
20 - EXT4 CU-SFP enabled N/A none