Nortel Networks 8005DC User Manual
Page 55
8681XLW module
55
"8681XLW module LEDs" (page 55)
shows the location of the 8681XLW
module LEDs.
Unlike other 8600 modules, the TX LED for the 8681XLR and 8681XLW
modules is located below the RX LED.
8681XLW module LEDs
"8681XLW module LEDs" (page 55)
describes the 8681XLW module LEDs.
8681XLW module LEDs
Type
Label
Color/State
Meaning
Green/Blinking
The port is transmitting data.
Green/Steady
The port is enabled but not
transmitting data.
TX
Off
The port did not detect a fault
condition.
Green/Steady
The port has a link and is enabled.
Green/Blinking
The port is receiving data.
Port
RX
Amber/Steady
The cable is disconnected, the port
is disabled, the link is down, or
SONET errors are detected.
Green/Steady
The module has completed its
power-on self-test and software
initialization and is operating
normally.
Amber/Steady
The module slot is disabled.
Module
Online
Off
The switch power is off. If the
switch power is on, the module
is going through its power-on
self-test and software initialization.
A module in this state is not yet
functional.
Nortel Metro Ethernet Routing Switch 8600
Installation — Modules
NN46220-306
02.02
Standard
4.2
7 July 2008
Copyright © 2005-2007, Nortel Networks
.