Nvidia N61S User Manual
Page 34
- -
nVIDIA N61P/N61S/N61V User's /Manual
Load Fail-Safe Defaults (Y/N)? N
4.5.11 Load Fail-Safe Defaults
This option opens a dialog box that lets you install fail-safe defaults for all appropriate items
in the Setup Utility: Press <Y> and the <Enter> to install the defaults. Press <N> and
then <Enter> to not install the defaults. The fail-safe defaults place no great demand on
the system and are generally stable. If your system is not functioning correctly, try installing
the fail-safe defaults as a first step in getting your system working properly again. If you
only want to install fail-safe defaults for a specific option, select and display that option,
and then press <F6>.
4.5.12 Load Optimized Defaults
This option opens a dialog box that let you install optimized defaults for all appropriate
items in the Setup Utility. Press <Y> and then <Enter> to install the defaults. Press <N>
and then <Enter> to not install the defaults. The optimized defaults place demand on the
system that may be greater than the performance level of the components, such as the
CPU and the memory. You can cause fatal errors or instability if you install the optimized
defaults when your hardware does not support them. If you only want to install setup
defaults for a specific option, select and display that option, and then press <F7>.
Load Optimized Defaults (Y/N)? N
4.5.13 Set Supervisor/User Password
When this function is selected, the following message appears at the center of the screen
to assist you in creating a password.
Type the password, up to eight characters, and press <Enter>. The password typed now
will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>.
Enter Password:
Confirm Password:
You may also press <Esc> to abort the selection.
Note:
Don’t forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set options.