Radio Shack 1500 - Manual (Page 13)

13
OPERATION
RECEIVING A CALL
When you receive a call, the
telephone automatically displays infor-
mation about the caller and stores the
information in Caller ID memory, if you
subscribe to the service. The tele-
phone can store up to 19 phone num-
ber, or up to 7 name and phone
number records.
Note: The flashing -- changes to
steady and the current time stops run-
ning while the telephone records and
displays the time of an incoming call.
After about 30 seconds,
-- flashes
again when the display shows the up-
dated current time.
REVIEWING CALL
RECORDS
Press REVIEW once. The display
shows the number of calls you
received.
Press REVIEW again, NO--01 ap-
pears briefly, then the first line of the
caller’s information appears.
To display all the caller’s available in-
formation, press
READ . Each time you
press READ , the display cycles
through the caller’s information in this
order:
Name (or other information)
Phone number
Time of call
To display the next record, press
REVIEW again.
When you reach the end of the call
records,
END OF LIST appears.
Notes:
• If you have not received any calls,
NO CALLS appears when you
press REVIEW .
• If you do not press any button
within 30 seconds while you are
reviewing call records, the tele-
phone automatically returns to the
time display.
• If the caller’s name or the phone
number is more than 11 charac-
ters,
appears on the display.
Press READ to see the rest of the
name or number.
• When the Caller ID Memory is full
and a new call arrives, the tele-
phone automatically deletes the
oldest call record to store the new
call information.
43-976.fm Page 13 Monday, August 16, 1999 4:38 PM