Ricoh BIZWORKS 106 - Manual (Page 282)

58
TECHNICAL REFERENCE
02:0010 Ç 000
Selecting 300 dpi or 600 dpi
Set the printer to 300 dpi if the designated output is not obtained when
printing using a DOS application compatible with the 300 dpi PCL printer.
Prt Help List O K
3 User Param.
1 Press .
2 Press or until “3
User Param.” appears. The messages
change in the following order.
3 Press and press to
move the flashing block cursor until it
appears in the position shown in the
illustration to the right.
4 Press to change the setting to 1 or
0, as desired.
Display Heater status
02:0010 0000 600 dpi (default setting)
02:0010 1000 300 dpi
Note
The bits other than the one highlighted in the illustration are unrelated to this
setting.