Ricoh BIZWORKS 106 - Manual (Page 313)

5
SETTING UP
1. SETTING UP
Installing the Document Output Tray
1
Look at the rear of the machine to con-
firm where the document output tray
should fit.
2 Insert one end of the document output
tray into the slot provided. Then gently
bend the tray so the other end fits into
the second slot.
3 Make sure the small pieces of plastic
film curl upwards as shown.
Important!
Documents will not be delivered properly un-
less the pieces of film are set as shown.
b(GB)6.5_Chapter 01_p01-09 99.8.3, 1:12 PM 5