Roland Classic Organ C-380 - Manual (Page 57)

57
Recording Your Performances
1. Press the [STOP] piston to return to the first measure of the song you recorded.
2. Press the [PLAY/PAUSE] piston to play back the recorded song.
You can adjust the tempo of the playback (p. 54).
Press the [PLAY/PAUSE] piston, you can pause the playback. Playback will resume from the same location when you press
the [PLAY/PAUSE] piston once again.
3. To stop playback, press the [STOP] piston.
The song you recorded will be lost when you switch off the organ’s power. If you want to keep the recorded song, you must save it to
USB memory or to the organ’s internal memory.
1. If you want to save to USB memory, connect your USB memory to the USB connector (p. 26).
2. From the main screen, press the [STOP] piston to access the “Song Recorder” screen.
3. Turn the [Select/Menu] knob to select “Save Song.”
fig.LCD040.eps
4. Press the [Select/Menu] knob to access the “Save Song” screen.
5. Turn the [Select/Menu] knob to select “Save to,” and turn the [Value/Exit menu] knob to choose the desired save
destination.
fig.LCD041.eps
6. Turn the [Select/Menu] knob to select “Name,” and press the [Select/MENU] knob to assign a name to the song.
For details on how to assign a name, refer to “If you want to name the data you’re saving” (p. 61).
The song you recorded will automatically be given the name “New Song.”
Play Back the Recorded Song
Saving a Recorded Song
Save to Explanation
INTERNAL The song will be saved to internal memory.
USB
The song will be saved to USB memory. Shown only if USB memory is
connected to the USB connector.
C-380_330_e.book 57 ページ ２０１０年４月２８日 水曜日 午後１０時１１分