Loading from usb memory into internal memory, Deleting a memory bank from usb memory – Roland Classic Organ C-380 User Manual
Page 63
63
Saving and Loading Settings on USB Memory
8.
Turn the [Select/Menu] knob to select the “No.” field.
9.
Turn the [Value/Exit Menu] knob to select the area in
which you want to save the settings.
10.
Press the [SET] piston to save the data.
If you decide to cancel, press the [Value/Exit Menu] knob.
Never disconnect the USB memory or turn off the power while
sound settings are being saved to USB memory. Otherwise, the
sound settings will not be saved to USB memory, and
malfunction may occur.
Here’s how memory banks saved on USB memory can be loaded
into internal memory.
* When you load the memory banks into internal memory, all memory
banks currently stored in the organ’s internal memory will be
overwritten (replaced) by the memory banks that were saved in USB
memory. The memory banks stored in the organ’s internal memory
cannot be recovered, so please be sure to check the contents of
internal memory before you proceed.
1.
Connect your USB memory to the USB memory connector
2.
From the main screen, press the [Select/Menu] knob.
3.
Turn the [Select/Menu] knob to select “11 Save/Load
(USB).”
fig.LCD012.eps
4.
Press the [Select/Menu] knob to access the “Save/Load
(USB)” screen.
5.
Turn the [Select/Menu] knob to select “Load Memory
Bank.”
fig.LCD622.eps
6.
Press the [Select/Menu] knob to access the “Load
Memory Bank” screen.
7.
Turn the [Select/Menu] knob to select the “No.” field.
fig.LCD623.eps
8.
Turn the [Value/Exit Menu] knob to select the number of
the sound settings that you want to load.
9.
Press the [SET] piston.
A confirmation screen will appear.
If you decide to cancel, press the [Value/Exit Menu] knob.
fig.LCD624.eps
10.
Press the [SET] piston; the sound settings (registration)
will be loaded.
Never disconnect the USB memory or turn off the power while
sound settings are being loaded from USB memory. Otherwise,
the sound settings will not be loaded into the organ, and
malfunction may occur.
1.
Connect your USB memory to the USB memory connector
2.
From the main screen, press the [Select/Menu] knob.
3.
Turn the [Select/Menu] knob to select “11 Save/Load
(USB).”
fig.LCD012.eps
4.
Press the [Select/Menu] knob to access the “Save/Load
(USB)” screen.
Loading from USB Memory into Internal
Memory
Deleting a Memory Bank from USB Memory
C-380_330_e.book 63 ページ ２０１０年４月２８日 水曜日 午後１０時１１分