ResMed VPAP III & III ST - Manual (Page 30)

24
•
To access the VPAP menus:
Press the Left key (menu) while the VPAP (or Ramp) screen is displayed.
•
To scroll through items within a menu or submenu:
Press the Up/Down key
•
To enter a submenu:
Press the Left key (enter).
•
To change a setting option for a function:
1. Press the Left key (change)
2. Press the Up/Down key until the desired setting option appears.
3. Press the Left key (apply) to select the setting option.
•
To exit without changing options:
Press the Right key (cancel)
•
To exit out of a menu or submenu:
Press the Right key (exit)
Note: You can return to the VPAP (or Ramp) screen at any time by holding the
Right key for at least three seconds.
Menu Functions (Detailed menu only)
The VPAP menu functions are summarised in Tables 2–6 below with a brief
description of what each function does and the available setting options. To
access these functions, see “How to Use the Detailed Menu (if enabled by your
clinician)” on page 22.
Settings Menu
The Settings Menu allows you to view and change certain operating features of
the VPAP unit.
Table 2: Settings Menu Functions
Function Default Function Description Setting Options
Mask ULTRA Selects your mask type. See “Settings for
Mask Types” on
page 25 for details.
Tube Length 2m Selects the length of air tubing
connecting your mask to the VPAP. 2m / 3m
Humidifier NONE Selects the type of humidifier to
be used with the VPAP. NONE, PASSOVER,
HUMIDAIRE
If the HumidAire 2i is
used, the above
setting options do
not appear and H2i is
displayed.