Radio Shack 63-267 - Manual

63-267
User’s Guide
Solar Clock
power saving
     
Please read this user’s guide before using your clock.
Package contents
Clock Base
User’s Guide Quick Start
Features
Dual power supply
Snooze function
Indoor temperature display
1
Install battery
You need one AAA alkaline
battery (not included) to power
on your clock and set your
time and alarm. Make sure you
match the polarity symbols (+
and -) marked inside.
b
Battery Notes:
Dispose of batteries promptly and properly. Do
not burn or bury them.
Use only fresh batteries of the required size
and type.
Remove exhausted batteries from the clock.
Batteries can leak chemicals that can damage
electronic parts.








Specifications
Temperature Range .... 0 to +50°C (32°F to 122°F)
Time Display .................................... 12 / 24 hours
Year range ........................................ 1901 - 2099
Limited Warranty
Ignition L.P. warrants this product against defects in materials and
workmanship under normal use by the original purchaser for ninety
(90) days after the date of purchase. IGNITION L.P. MAKES NO
OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or
attributable to abuse, misuse, failure to follow instructions, improper
installation or maintenance, alteration, accident, Acts of God (such
as floods or lightning), or excess voltage or current; (b) improper or
incorrectly performed repairs by persons who are not a Ignition L.P.
Authorized Service Facility; (c) consumables such as fuses or batter-
ies; (d) ordinary wear and tear or cosmetic damage; (e) transportation,
shipping or insurance costs; (f) costs of product removal, installation,
set-up service, adjustment or reinstallation; and (g) claims by persons
other than the original purchaser.
Should a problem occur that is covered by this warranty, take the
product and the sales receipt as proof of purchase date to the place
of purchase. Ignition L.P. will, at its option, unless otherwise provided
by law: (a) repair the product without charge for parts and labor;
(b) replace the product with the same or a comparable product; or
(c) refund the purchase price. All replaced parts and products, and
products on which a refund is made, become the property of Ignition
L.P. New or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty
period. You will be charged for repair or replacement of the product
made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND
CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION
OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE
PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR
INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING,
BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCON-
VENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE,
OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you may also
have other rights which vary from State to State. You may contact
Ignition L.P. at:
Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201
02/09
For product support, call 1-866-315-0426
2
Place Your Clock
Place your clock on the magnetic base.
Set the Clock
1. Press SET. The second digits flash.
2. Press  or  to reset to zero.
3. Press SET repeatedly to choose hour,
minute, year, month and date.
4. Use  or  to adjust the digit.
Set the Alarm
1. Press £ to enter alarm mode. AL shows.
2. Press SET to set hour and minute. Use 
or  to adjust the digit.
3. Press SET to confirm.
The alarm sounds for 40 seconds without
interruption. Press Z Z to snooze the alarm for 5
minutes. Press any button to stop the alarm for
24 hours.
In alarm mode, press £ more than once to turn
the alarm on or off. £ appears when the alarm
is turned on.
Reset the Clock
If the clock malfunctions, use a
straightened paper clip to press
RESET. Your clock returns to
default settings.
In alarm mode, press to switch to clock mode.
In clock mode, press to toggle between normal
time and daylight saving time.
12
24 Press to toggle between
12-hour and 24-hour format.
C
F Press to toggle between
Fahrenheit and Centigrade display.
£
In clock mode, press to enter
alarm mode.
In alarm mode, press to turn the
alarm on/off.
Z Z
Press to snooze the alarm for 5
minutes.
Press to turn the key sound on/off.
 or 
Adjust digit.
SET
Set your clock and alarm.
Protect the environment by recycling used electronics. Go
to E-CyclingCentral.com to find an electronic recycling
center near you.
Printed
in China 07A09
63-267 © 2009. Ignition L.P. All rights reserved.
AAA