Runco VX-4c - Manual (Page 19)

Folded Optics
In rear screen applications where space behind the pro-
jector is limited, a mirror may be used to fold the opti-
cal path. The position of the projector and mirror must
be accurately set-if considering this type of installation,
call your Runco dealer for assistance.
2.9 Source Connections
The rear panel of the projector provides standard input panels to which you may connect a vari-
ety of sources. See below - the lower left area (INPUT 1) typically accepts an RGB signal from
an external RGB source (such as the VHD Ultra Controller), or it can also be used for YPbPr sig-
nals from DTV sources. The upper right panel-the Video Decoder Module-accepts only compos-
ite video at INPUT 3 or S-video at INPUT 4 from devices such as VCRs, laser disc players or
DVD players. There are also several optional interfaces available for connecting other sources at
INPUT 2. Such an option installs in the upper left area, just below the audio connectors. For any
input, including the optional inputs, audio with loop through connects at the audio input panel
located between the license label area and INPUT 2.
Rear Connector Panel
INSTALLATION AND SETUP
Connect Control Line
From Vivix Controller
Vivix Controller
Note: The decoder module is an option; it is not supplied with the Projector.
2-12
2.8