Runco VX-4c - Manual (Page 58)

OPERATION
3-32
OPERATIONAL PARAMETERS
Password Protect
In Operational Parameters the installer can decide to use password protection by putting check
in the box to the right of the Password Protect item.
New Password
A New Password can be established byselecting the new password item from the menu.
Lock Adjustments
The Lock Adjustments item brings up another sub menu of each type of adjustment that can be
locked globally, such as color, tint, contrast, etc.
Color Balance Setup
In Color Balance Setup, the preset color balance for the ISF DAY and ISF NIGHT presets can
be customized and stored.
ISF C3 Calibration
The ISF 3C splash screen can be configured in the ISF 3C Calibration sub menu. This allows
the installer to enter the customer's name, installer's name, and date of calibration.
Reset Lamp Strike
Reset Calibration Counter allows the installer to zero out the calibration counter that appears in
the information screen. This should be done each time the projector is calibrated. This counter
is separate from the lamp hours and projector hours, it is used to record the time between subse
quent calibrations to the projector.
Shutdown If Fan Fails
The Shutdown if Fan Fails should always be checked to in order to not void the warranty.
Chroma Flare Adjust
The Chroma Flare Adjust is used as a convergence function to correct for large chromatic errors
may occur on screen sizes above 20' wide.
Reset All Parameters
Reset All Parameters puts the projector back to the factory default state. All calibration data is
lost and the projector must be setup from the beginning.
Operational Parameters
Password Protect
New Password
Lock Adjustments
Color Balance Setup
ISF C3 Calibration
Reset Lamp Strike
Shutdown if Fan Fails
Chroma Flare Adjust
Reset All Parameters
Operational Parameters Menu