Roland DR-3 - Manual (Page 30)

30
Let’s Use a Foot Switch
Using the Foot Switch
The example here describes use of the DR-3 with two foot
switches connected.
When you have only one foot switch connected, you can only use
it to start and stop the performance.
1
With the performance stopped, press [MANU] so the
button lights up.
This puts the DR-3 in Manual mode.
2
When you press the foot switch connected with the
plug with a white ring, the performance begins.
The performance starts from the intro.
3
Pressing the foot switch connected with the plug that
has a red ring switches to the next verse after the
verse currently being played.
4
When you press the foot switch connected with the
plug with the white ring, the ending is played, and
then the performance stops.
You can change the foot switch
functions. For more details,
refer to “Assigning Functions
to the Foot Switch” (p. 49).
When you press the foot
switch with the red ring, a fill-
in is played after the verse
currently being played, and
the performance switches to
the next verse. Pressing the
foot switch while Verse A is
playing switches the
performance to Verse B,
pressing the foot switch
during Verse B switches the
performance to Verse C, and
pressing the foot switch
during Verse C switches the
performance to Verse A.
By continuing to press the foot
switch, you can select
subsequent verses according to
the number of times you press
the foot switch.