Roland DR-3 - Manual (Page 92)

92
Chapter 10 Creating Your Own Kits
Copying the Kit
This copies the kit to the User kit (U01–U50).
fig.09-19d
Press [ENTER].
fig.09-20d
Turn the VALUE dial to select the number for the
kit to be copied, then press [
].
fig.09-21d
Turn the VALUE dial to select the copy-
destination kit number, then press [
].
fig.09-22d
Press [ENTER] to execute the copy.
If you press [ ], you’re taken back to the screen
you were in immediately before that.
You can press [EXIT] to cancel the procedure, and
go back to the previous screen.