Radio Shack 43-3880 - Manual (Page 25)

S
e
tti
n
g
M
e
n
u
Op
ti
o
n
s
25
Setting CIDCW (Caller ID on
Call Waiting)
Caller ID on Call Waiting (CIDCW) displays
the name and number of an incoming call
while you are on the line. Call Waiting
Deluxe (CWDX) allows you to handle call
waiting calls in seven different ways.
1. Press the MENU soft key. Select the
Global Setup menu, and then the
CIDCW submenu.
2. Press VOL/RING/ or VOL/RING/ to
select CW On / CWDX On , CW On / CWDX
Off , or CW Off / CWDX Off , and then
press the OK soft key. You will hear a
confirmation tone.
Setting the Area Code
If you enter a 3-digit area code number in
the “Area Code” option, your local area
code does not appear in the Caller ID
message. For calls received from outside
your local area code, you will see a full 10-
digit number.
Ô
1. Press the MENU soft key. Select the
Global Setup menu, and then the Area
Code submenu.
2. Press the number keypad ( 0 - 9 ) to enter
a 3-digit area code.
3. Press the OK soft key. You will hear a
confirmation tone.
Setting the Dial Mode
Sets the dial mode to tone or pulse. Most
phone systems use tone dialing; the default
setting is tone dialing. Set the dialing mode
to match the dialing system used by your
local phone service.
Ô
NOTES
Ô
• If the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, use the
DELETE soft key and
number keys to enter the
new area code.
• If your calling area
requires 10-digit dialing,
do not program this
option.