Radio Shack 43-3880 - Manual (Page 47)

Ex
panding Y
our
Phone
47
When Registration Complete is
displayed, the handset has been
registered to the base. If
Registration Failed appears,
please try these steps again.
U SING THE D IRECT L INK
M ODE
To use this feature, you must enter the two
handsets into the DirectLink mode first.
Ô
To enter the DirectLink mode, see “Using
DirectLink Mode” on page 16.
DirectLink call
1. When the phone is in the DirectLink
standby mode, press the DirectLink soft
key.
2. Select the handset to which you wish to
DirectLink with by pressing the number
keys (
1 - 9 , 0 ). Your handset will then
page the other handset.
3. On the receiving handset, press
TALK/FLASH , the ANSWER soft key or if
Anykey Answer is on, press any
number key,
/TONE/< or #/> .
4. When you finish your conversation,
press END or the END soft key on either
handset. Return the handset to the
cradle, or press the
CANCEL soft key
and then the OK soft key (cancelling
DirectLink mode).
Ô
NOTE
Ô
Handsets can be in Direct
Link mode while other
handsets are in use.To use
the 43-3581, register it to
the original base.