Onkyo TX-DS656 - Manual (Page 32)

32
Listening to FM/AM broadcasts
Tuning in an FM/AM station by specifying the
frequency (Manual tuning)
In the following procedure, use the front panel buttons.
1. Press the FM or AM button.
2. Press the TUNING button.
"Tuning" appears on the display.
3. Rotate the SMART SCAN CONTROLLER clockwise or
counterclockwise to select the frequency of your desired station.
The selected frequency is shown on the display.
The TUNED indicator lights up on the display when the station is
properly tuned in.
• The frequency is changed in 100 kHz steps in FM and 9 kHz steps in AM.
Automatically tuning in an FM station (Auto tuning)
In the following procedure, use the front panel buttons.
1. Press the FM button.
2. Press the AUTO TUN button.
The AUTO indicator lights up on the display.
3. Press the TUNING button.
"Tuning" is displayed.
4. Rotate the SMART SCAN CONTROLLER clockwise or
counterclockwise.
The selected frequency is shown on the display.
Rotating the SMART SCAN CONTROLLER clockwise (or
counterclockwise) causes scanning of stations toward the higher (or
lower) frequencies. When a broadcast is tuned in, scanning stops
and the TUNED indicator lights up.
Follow the same procedure to tune in the next station.
If auto tuning of an FM station is not possible
When you tune in a stereo FM station, the STEREO indicator lights up
if the signal is sufficiently strong. If the signal is weak, your desired
station may not tune in. In this case, try the following to receive the
signal in the mono mode:
First, press the FM MUTE/MODE button.
The broadcast is heard in mono.
Next, tune in the station you want to listen to.
The station is now tuned in with reduced interference noise and fewer
sound dropouts.
Note:
If you turn off the FM MUTE indicator, interference noise will be
heard when you switch from one station to another.
Tuning in a broadcasting station
You can use one of the following two methods to listen to FM/AM
broadcasts with the TX-DS656's built-in tuner.
• Tune in a broadcasting station
- Tune in an FM/AM station by specifying the frequency (Manual
tuning)
- Automatically tune in an FM station (Auto tuning)
• Recall a preset broadcasting station
You can name preset stations so that you can easily find the desired
station.
MASTER VOLUME
MAX MIN
TREBLE
SYSTEM
PHONES
DISPLAY PTY/ TP CHARACTER SCAN GROUP MEMORY FM MUTE / MODE
CLEAR
TI CH INPUT MUL
VIDEO CAM INPUT / 3 VIDEO
VIDEO AUDIO L R(MONO)
BASS
DIGITAL AUDIO SELECTOR
S VIDEO
STAND-BY
AUTO TUN
SMART SCAN CONTROLLER
ENTER
3-D BASS MAIN REMOTE SPEAKERS
PRESET
TUNING
SURROUND
PARAMETER
CD PHONO AM FM TAPE-2 MONITOR TAPE-1 M D VIDEO-3 CAM VIDEO-2 VCR-2 / TV VIDEO-1 VCR-1 DVD
MIDNIGHT
THEATER Re-EQ MULTI SOURCE REC OUT
AUDIO VIDEO CONTROL RECEIVER TX-DS 656
POWER
OFF ON
SMART SCAN CONTROLLER
SMART SCAN CONTROLLER
TUNED
3
4
SMART SCAN CONTROLLER jog dial
TUNING button
AM button
FM button
AUTO TUN button
Display
FM MUTE/MODE button
FM MUTE
FM MUTE / MODE
Turn off this indicator.
kHz
MHz
kHz
MHz