Troy-Bilt 24A-070F766 User Manual
Operator’s manual
Self Propelled
Yard Vacuum
Chipper/Shredder/
Vacuum/Hose
Model Number
24A-070F766
Operator’s Manual
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
TROY-BILT LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
PRINTED IN U.S.A.
FORM NO.
769-01295.fm
(7/04)
Document Outline
- SECTION 1: Important safe operation practices
- TRAINING
- PREPARATION
- OPERATION
- MAINTENANCE AND STORAGE
- SECTION 2: Assembling Your yard vacuum
- Opening Carton
- Removing Unit From Carton
- Loose Parts In Carton (See Figure 1)
- Disconnecting Spark Plug Wire
- Attaching The Handle
- Attaching The Hose Assembly
- Attaching The Bag
- Attaching The Blower Chute
- SECTION 3: Know your yard Vacuum
- SECTION 4: operating your Yard Vacuum
- Gas And Oil Fill-Up
- Starting Engine
- Stopping Engine
- To Empty Bag
- To Remove Blower Chute
- Using the Nozzle Vacuum
- Nozzle Height Adjustment
- SECTION 5: Maintaining your Yard Vacuum
- Customer Responsibilities
- Lubrication
- Maintenance
- SECTION 6: Servicing Your Yard Vacuum
- Drive Control Cable Adjustment
- Removing The Flail Screen
- Sharpening Or Replacing Chipper Blade
- Storing Your Yard Vacuum
- SECTION 7: troubleshooting
- SECTION 8: parts list for model 24A-070F766