TANDBERG D1320203 - Manual (Page 20)

TANDBERG 3G Gateway Data port Command Interface User Guide
4.2.2. General 3G Gateway Commands
Command: Description:
ExternalManager This command sets the path and address of the TMS server. A message is sent to TMS when the 3G
Gateway starts up to signal TMS that the 3G Gateway is ready.
ExternalManager Path: <S: 0, 255>
or
ExternalManager Address: <S:0, 64>
--
sub-commands:
• Path
• Address, the IP address of the manager
Example of ExternalManager feedback
*c xConfiguration ExternalManager Path:
"tms/public/external/management/SystemManagementService.asmx"
*c xConfiguration ExternalManager Address: ""
NTP This command sets the address of the NTP server.
NTP Address: <S: 0, 64>
--
sub-commands:
• Address, the IP address of the server
Example of NTP feedback
*c xConfiguration NTP Address: "131.188.3.220"
Options View and adapt option keys
NOTE! The 3G Gateway needs to reboot before the changes will take effect.
Options [1 .. 64] Key: <S: 0, 90>
---
sub-commands:
• Key: Option key for e.g. BRI, PRI or SS7 trunks, VP call package.
Example of Options feedback:
*c xConfiguration Options 1 Key: "115201SS7-1-55C3EBB7"
*c xConfiguration Options 2 Key: "115201P1-1-6A96DAA4"
*c xConfiguration Options 3 Key: "115201P1-2-1811D4FA"
*c xConfiguration Options 4 Key: "115201P1-3-79828C53"
*c xConfiguration Options 5 Key: "115201P1-4-B5E5BD4A"
SS7 Configures the SS7 Signalling for all 3G Gateway trunks
NOTE! The 3G Gateway needs to reboot before the changes will take effect.
D1320203 20