Yamaha PSR-510 - Manual (Page 23)

21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
0 2 1
RESET
– +
■
DSP Type
The [DSP TYPE] button selects one of eight digital effects that you can use for extra depth and expressive
power. This button determines the type of effect to be used, while the [DSP DEPTH] button in the VOICE sec-
tion allow the depth of the effect to be individually set for each orchestration part.
Z
Press the [DSP TYPE] Button ...............................................................................................................
Press the OVERALL CONTROL section [DSP TYPE] button. The
number of the current DSP type will appear on the MULTI DISPLAY.
X
Select a DSP Type ..................................................................................................................................
Use the [
+
] and [
−
] buttons, the number buttons, the data dial, or the
[DSP TYPE] button itself to select the desired DSP type (0 for OFF, or 1 …
8 as listed below). The default DSP type (1) can be recalled instantly by
pressing both the [
+
] and [
−
] buttons at the same time.
The DSP Types
1 Hall 1
2 Hall 2
3 Room 1
4 Room 2
5 Plate 1
6 Plate 2
7 Delay 1
8 Delay 2
NOTES
• DSP effects may sound different with different voices.
• The DSP type setting is retained in memory even when the power
switch is turned off, as long as batteries are installed or an AC adaptor
is connected.
For a spacious reverb sound use one of the Hall settings. These
effects simulate the natural reverberation of a concert hall. Hall 2
has a longer reverb time and therefore simulates a larger hall
than Hall 1.
These settings add relatively short reverb effects to the sound
that are similar to the type of acoustic reverberation you might
hear in different rooms.
These are simulations of the large plate reverb devices tradition-
ally used in professional recording studios.
Delay 1 produces a distinct series of delay repeats, while Delay 2
produces a smoother multiple-delay sound.
0 OFF .....................................
1 HALL 1
2 HALL 2
3 ROOM 1
4 ROOM 2
DSP
TYPE
DSP TYPE
5 PLATE 1
6 PLATE 2
7 DELAY 1
8 DELAY 2