ZyXEL Communications PLA-4xx Series - Manual (Page 57)

Appendix A Product Specifications
PLA-4xx Series User’s Guide
57
The following list, which is not exhaustive, illustrates the standards supported in the PLA-4xx.
Wall-mounting Instructions
Complete the following steps to hang your PLA-4xx on a wall.
"
See Table 11 on page 55 for the size of screws to use and how far apart to place
them.
1 Select a high position on a sturdy wall that is free of obstructions.
2 Drill two holes for the screws. The distance between the centers of the holes is listed in
the product specifications appendix.
1
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the PLA-4xx with the connection cables.
5 Align the holes on the back of the PLA-4xx with the screws on the wall. Hang the PLA-
4xx on the screws.
Table 13 Performance
FEATURE DESCRIPTION
Throughput over PHYsical Transport
Medium (PHY)
Supports up to 200 Mbps in half duplex mode
Throughput over UDP Supports up to 150 Mbps over in-house power/coaxial
lines (LAN port limits to 100 Mbps)
Number of devices in one powerline
network
Supports up to 64 devices in 4 network groups
Table 14 Standards Supported
STANDARD DESCRIPTION
HomePlug AV Designed for transmitting audio/video on a home powerline network.
RFC 868 Time Protocol.
RFC 1112 IGMP v1
RFC 1157 SNMPv1: Simple Network Management Protocol version 1
RFC 1901 SNMP v2c Simple Network Management Protocol version 2c
RFC 2236 Internet Group Management Protocol, Version 2.