ZyXEL Communications ZyXEL ZyWALL 70 - Manual (Page 3)

ENGLISH
3
Do the following to make hardware connections for initial setup.
1 Use an Ethernet cable to connect the LAN port to a computer. You can also use Ethernet cables to
connect public servers (web, e-mail, FTP, etc.) to the DMZ ports.
2 Use another Ethernet cable(s) to connect the WAN 1 and/or WAN 2 port to an Ethernet jack with Internet
access.
3 Insert the ZyWALL Turbo extension card to use the anti-virus and IDP features or insert a wireless LAN
card to use the wireless LAN feature. See the ZyWALL Turbo Card guide for more information about the
extension card. See the user’s guide about installing a wireless LAN card.
4 Use the included power cord to connect the power socket (on the rear panel) to a power outlet.
5 Push the power switch to the on position and
look at the front panel. The PWR LED turns on. The SYS
LED blinks while performing system testing and then stays on if the testing is successful. The ACT, CARD,
LAN, DMZ, and WAN LEDs turn on and stay on if the corresponding connections are properly made.