ZyXEL Communications ZyXEL ZyWALL 70 - Manual (Page 5)

ENGLISH
5
6 Check the
Network
Status
table. If the
WAN 1
status is not
Down and
there is an
IP address,
go to
Section 5 .
If the WAN
1 status is
Down (or
there is not
an IP
address),
click the
Wizard icon
and use
Section 4 to configure WAN 1.
Use the NETWORK WAN screens if you need to configure WAN 2. You can also configure load balancing
between the WAN ports.
3 Bridge Mode
When you set the ZyWALL to bridge mode, it functions as a transparent firewall. Do the following to set the
ZyWALL to bridge mode.