ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 149)

Status Registers and Result Codes 137
Command bit dec hex Function and description Ref.
0 1 1 Capture DTE-DCE interface
protocol information.
1 2 2 Capture B-channel (X.75 or
V.120) frames.
2 4 4 Capture D-channel protocol
information.
3 0 *0 Display S register value in
decimal format.
8 8 Display S register value in hex
format.
4 0 * 0 Indicate Caller ID after the 1st
RING message.
16 10 Disable Caller ID indication.
5 0 0 Phone 1 has higher priority for
answering an analog call. &L0
32 20 Phone 2 has higher priority for
answering an analog call. &L1
S85= bit dec hex DCA function.
0
0 *0 DCA function disabled. CE0
1 *1 DCA function enabled. CE1
1-6 *0 Add-persist time interval. KAxn
7 0 0 S85b1-6 is in Second unit. KASn
128 80 S85b1-6 is in Minute unit. KAMn
S86= dec hex D channel protocol selection
(USA) The following number
is valid only for American
version:
Pn
0 0 Northern Telecom proprietary
ISDN.
1 1 National ISDN 1 (1 SPID
mode).
2 2 National ISDN 1 (2 SPID
mode).
3 3 Reserved.