ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 86)

74 Handling Analog Calls (non-data)
Phone 1
MSN
Matched
Phone 2
MSN
Matched
Global Call
(No Called
Party No.)
S120.2
(Default=0)
AT&Ln
(Default
n=0)
Phone 1 Phone 2
ь ы ы
- - Ring -
ы ь ы
- - - Ring
Unassigned Unassigned
û
0 - Ring Ring
Unassigned Unassigned
û
1 n=0 Ring -
Unassigned Unassigned
û
1 n=1 - Ring
ь ь ы
0 - Ring Ring
ь ь ы
1 n=0 Ring -
ь ь ы
1 n=1 - Ring
ы ы ы
- - - -
- -
ь
0 - Ring Ring
- -
ü
1 n=0 Ring -
- -
ü
1 n=1 - Ring
The default MSN sub-address (or EAZ) for 1TR6 (Old German
ISDN) of the a/b adapters are as follows:
•
Phone 1: EAZ = 4 (&ZI7=4)
•
Phone 2: EAZ = 3 (&ZI6=3)
A global call is an inbound voice call without the information of
destination phone number (Called-Party-Number) which happens
more often than not on some switches when the calling site is on the
PSTN (analog telephone). By default, the TA will route the global
call to both the POTS ports (make them alert). The one that picks up
the phone earlier answers the call.
AT Commands Description
ATS87.0=0 Enable POTS port 1 to accept global
calls.(Default)
ATS87.0=1 Disable POTS port 1 to accept global calls.
ATS87.1=0 Enable POTS port 2 to accept global
calls.(Default)
ATS87.1=1 Disable POTS port 2 to accept global calls.