Xerox WorkCentrePro - Manual (Page 88)

8 Parallel Port
88 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Test Print
To make sure that the machine has been installed on the parallel port correctly, submit
a test print from a client workstation. Perform the following steps.
1. Open a document on a workstation.
2. Select the machine as the printer.
3. Print the document on the machine and verify that it prints correctly.
4. Repeat the test for all workstations that will be sending jobs to the machine.
The installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for assistance.