Re-recording — punch in/out and start measure, Re-recording — punch in/out and start measure . 84, Recmenu=song 002 usersong1 recmode=multirec – Yamaha PSR-540 User Manual
Page 84: Song recording
84
RecMenu=Song
002 UserSong1
RecMode=MultiRec
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Recording start
(Punch In)
Recording stop
(Punch Out)
Previously
played data
Newly played data
Previously
played data
●
Before re-recording
●
After re-recording
82
Re-recording — Punch In/Out and Start Measure
This section shows you how to re-record a specific section of a already-recorded song.
In the eight-measure example below, the third measures through the fifth measure are
re-recorded.
1
Insert the floppy disk into the disk drive.
2
Press the [RECORD] button to engage the Record mode.
3
Select “Song”.
Use the data dial, the [+/YES] button or the [-/NO] button.
4
Press the [NEXT] button to display the Song selection
screen.
5
Select the Song you want to re-record.
Use the data dial, the [+/YES] button or the [-/NO] button.
6
Press the [NEXT] button again to display the RecMode
screen.
7
Select “MultiRec”.
Use the data dial, the [+/YES] button or the [-/NO] button.
Song Recording