Acura 2012 TL - Manual (Page 175)

Fail to press a memory button
within 5 seconds.
To cancel the storing procedure
after pressing the SET button, do
any of the following:
To select a memorized position, do
this:
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
Make sure the parking brake is set
and the shift lever is in Park
(automatic).
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
Change the power mode out
Turn the ignition switch out from
the ON (II) position.
Readjust the outside mirror
position.
Readjust the seat position.
Press the SET button again within
5 seconds.
1.
2.
CONTINUED
On models with keyless access system
On models without keyless access
system
Driving Position Memory System
Selecting a Memorized Position
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
171
MEMORY BUTTONS
11/01/14 18:23:27 31TK4630_176
from ON.
2012 TL