ACU-RITE VRO 300M - Manual (Page 41)

Program Operations VRO 300M
34
Teaching a Position
To teach a position to the readout as you are making a part, select a step as
you normally would. In any field where a position is needed, instead of
entering numerical position values, machine to the position that you want to
enter, then use the
TEACH POSITION softkey to enter the position value. Only absolute
position values are used.
Example
The Position step below needs to have the Y-axis entered.
Press the TEACH POSITION softkey and the
absolute position from the Y display is
automatically placed in the Y field.