EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 153)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
143
When you first use one of the Trim functions, it changes the configuration of the Player
and the Recorder preview windows:
•
The Player displays the last frame of the clip before the transition.
•
The Recorder displays the first frame of the clip after the transition.
How to Trim Around the Clip Transition
To trim around the clip transition, proceed as follows:
1. Place the nowline on the transition you want to trim.
The Trim buttons become active.
2. Click the Trim button corresponding to the requested trim action.
The last frame of the clip before the transition is loaded onto the Player.
The first frame of the clip after the transition is loaded onto the Recorder.
The counters are initialized to 0.
3. Click the requested Trim button as many times as the number of frames you want to
trim the transition.
The upper counter specifies the number of frames that will be added to
(move to right) or removed from (move to left) the end of the clip before
the transition.
The lower counter specifies the number of frames that will be added to
(move to left) or removed from (move to right) the beginning of the clip
after the transition.
4. Once the trim action has been defined, you can
o confirm the trim action by clicking
o reinitialize the trim operation by clicking
When you confirm the trim action, it is applied to the relevant clip, the counter information
disappears.
8.11.4 Rolling a Clip
Introduction
The button makes it possible to roll a clip, which means to modify the IN and the OUT
points of the selected clip, leaving its length unchanged.