EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 79)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
69
The middle area includes a dark grey zone. This zone shows the portion of the media out
of the whole media included in the top area and the position in the whole media:
•
When a media has just been loaded, the top area represents the whole media: The
dark grey area covers the whole space in the middle area.
•
If you position the mouse on the top area and rotate the mouse wheel up or down,
you respectively enlarge or reduce the dark grey area, hence increasing or reducing
the portion of the media included in the top area.
•
If you click on the dark grey area and drag it, you shift the portion of media included
in the top area.
•
When a mark IN and mark OUT are defined, double-clicking on the dark grey area
will toggle the portion covered by the top area from the entire media length to the clip
length (portion between mark IN and mark OUT).
Nowline, Mark IN and Mark OUT
Three positions can be defined in the media bar:
•
An IN point marked on the media is shown as a green line.
To add a mark IN, click at the requested position on the media bar and click the Mark
IN button .
•
An OUT point marked on the media is shown as a red line.
To add a mark OUT, click at the requested position on the media bar and click the
Mark OUT button .
•
The nowline, that is to say the current position within the media, is shown as a blue
line.
To place the nowline at a given position, simply click at the requested position on the
media bar.
To move their position, click on them with the mouse and drag them to the desired
position.
When the media is being played, the nowline moves along the top area of the media bar.
If the portion of the top area covers only a part of the media, the nowline may disappear.
In this case, a red indicator, on the left side or on the right side of the Media bar will be
displayed.