VTech DS6472-6 Manual - Manual (Page 95)

90
Answering system operation
Temporarily turning off the message alert tone
If the message alert tone is turned on, the telephone base beeps every 10
seconds when there are new or missed messages. Pressing any telephone
base key (except /FIND HANDSET) temporarily silences the message
alert tone.
If you press
DELETE/X when in idle mode to temporarily turn off the
message alert tone, there is a voice prompt directing you to press DELETE/X
again to delete all old messages. The message alert tone is temporarily off.
Only press DELETE/X a second time if you wish to erase all old messages in
your answering system.
The message alert tone resumes when you receive a new message.
Message playback
On the telephone base, if you have new messages, the
telephone plays only the new messages (oldest first). If
there are no new messages, the telephone plays back all
messages (oldest first).
On the handset, if you have both new and old messages,
you can play either new or old messages. The caller ID
information displays on the handset screen when you play
messages and you can call back the caller.
When playback begins, the handset displays the message
status, caller ID information, and time and date of the
message recorded. You hear the total number of messages
followed by the day and time of the message. After the last
message, the telephone announces, “End of messages,”
and the handset displays End of messages.
To play messages with the telephone base:
Press PLAY/
STOP
/ to listen to messages.
Options during playback:
Press /VOL or /VOL to adjust the speaker volume.
Press SKIP/ to skip to the next message.
Press REPEAT/ to repeat the message currently playing. Press
REPEAT/ twice to listen to the previous message.
Press
DELETE/X to delete the current message. The system
advances to the next message.
Press
PLAY
/STOP/ to stop.
1.
•
•
•
•
•
OLD MSG #1/3
ANDERSON ALLEN
11:49 10/29
[2]-Call info
REPEAT SKIP
You have:
3 Old messages
BACK SKIP