VEGA PLICSCOM - Manual (Page 37)

37
6 Setup - radar sensors from software 4.0.0
PLICSCOM •
36433-EN-130228
In this menu item, the Profibus ident number of the instrument is
displayed.
6.4 Adjustment menu Foundation Fieldbus
In the menu item "Display" you can define which measured value
should be presented on the display.
The sensor delivers the following measured values:
•
PV (Primary Value): Linearised percentage value
•
SV1 (Secondary Value 1): Percentage value after the adjustment
•
SV2 (Secondary Value 2): Distance value before the adjustment
•
AI-OUT 1
•
AI-OUT 2
•
AI-OUT 3
•
Height
In this menu item, you define the unit of the Secondary Values 2
(SV2):
In this menu item, the FF Device ID of the instrument will be dis-
played:
Info/Profibus Ident
Number
Display/Displayed value
Additional adjustments/
Unit SV2
Info/Device ID