VEGA PLICSCOM - Manual (Page 8)

8
3 Product description
PLICSCOM •
36433-EN-130228
Sensors with hardware version < 2.0.0, software version < 3.99
With these sensors, the interface for the display and adjustment
module and the external display and adjustment unit are connected
internally.
Operating two display and adjustment modules in parallel, i.e. one in
the sensor and one in the external display and adjustment unit, is thus
not possible.
I2C
Display
1 2 5 6 7 8
1
2
Fig. 4: Interfaces for display and adjustment
1 Spring contacts for display and adjustment module
2 Terminals for the external display and adjustment unit
Radar sensors with hardware version ≥ 2.0.0, software version
≥ 4.0.0, TDR sensors with hardware version ≥ 1.0.0, software
version ≥ 1.1.0
These sensors are provided with separate interfaces for the display
and adjustment module and for the external display and adjustment
unit.
Operating two display and adjustment modules in parallel in the
sensor as well in the external display and adjustment unit is therefore
possible. If the sensor is operated via one of the display and adjust-
ment modules, then the message "Adjustment blocked" appears.
Simultaneous adjustment is thus excluded.
Parallel operation of
display and adjustment
modules