Velleman HAA85BL - Manual (Page 12)

HAA85BL
v2 15/11/2013 VELLEMAN 12
Exit programming mode. All above data stored and
ready for use
NOTE: * Entering single user command code 8901 is not necessary if the keypad was already in single
user mode.
Cancel a wrong entry with
or wait 10 seconds and retry.
3. Operating the keypad – Taking the data programmed above and other default features as reference
a. To command output 1, enter one of the user codes in group 1 and validate with .
Output 1 activates for 1 second
Output 1 activates for 1 second
Output 1 activates for 1 second
b. To command output 2, enter one of the user codes in group 2 and validate with .
Output 2 starts or stops
Output 2 starts or stops
c. To command output 3, enter one of the user codes in group 3 and validate with .
Output 3 starts or stops
d. The personal master code is a super user code to command the outputs. This feature allows you to use
only one code to operate several keypads with the same master code but different user codes. Enter
the personal master code and validate with
and the corresponding output number.
Output 1 activates for 1 second
Output 2 starts or stops
Output 3 starts or stops
e. The duress code does not need to be programmed. The keypad automatically determines the duress
code by increasing the first digit of user codes in group 1 with two units. All user codes have duress
code function.
Example: User codes in group 1 Corresponding duress codes
8321 0321
11223 31223
33221 53221
To command the duress function, enter the duress code(s).
Duress output activates (output switches to ground) and output 1
activates for 1 second
Duress output activates (output switches to ground) and output 1
activates for 1 second