SENA HD1300 - Manual (Page 11)

Starter Kit and User Manual for the HelloDevice 1300
11
4. Setting Up the Hardware
The HelloDevice 1300 is as follows:
§ Install the HelloDevice Utility Software on user's PC
§ Connect the HelloDevice to the power supply and Ethernet
§ Set the IP address of HelloDevice
§ Check the HelloDevice network connection.
4.1 Installing Utility Software
Run setup1x00.exe in the HelloDevice CD-ROM from the PC that is connect to the network. Setup1x00.exe
runs on Microsoft Windows 95/98, NT and 2000. Select [Complete] and press [Next] button in the setup type
display screen.
Figure 4.1. Initial screen of the HelloDevice utility software installation program