Asus T2-P - Manual (Page 118)

118 Chapter 5: BIOS setup
The following items appear only when the Smart Q-Fan Function item
is set to Enabled.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
If any of the monitored items is out of range, the following error message
appears: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue or DEL to
enter SETUP”.
SMART Q-Fan Function [Enabled]
This item allows you to enable or disable the ASUS Smart Q-Fan feature that
smartly adjusts the fan speeds for more efficient system operation.
Configuration options: [Enabled] [Disabled]
Fan Auto Mode Start Voltage [5.0V]
This item allows you to select the voltage for the auto start fan feature. The
fan starts when the system reaches the specified voltage.
Configuration options: [4.0V] [4.5V] [5.0V] [5.5V] [6.0V]
Fan Auto Mode Start Temp [30 º C]
Select the temperature for the auto start fan feature. The fan starts when the
system reaches the specified temperature.
Configuration options: [25
º C]...[75 º C]
Fan Auto Mode Full Speed Temp [70 º C]
Select the temperature for the fan to rotate in full speed. The fan switches to
full speed when the system reaches the specified temperature.
Configuration options: [25
º C]...[75 º C]