Asus T2-P User Manual
Page 94
94
Chapter 5: BIOS setup
To recover the BIOS from the support CD:
1.
Boot the system.
2.
When a corrupted BIOS is detected, the following screen message
appears.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
3.
Place the support CD in the optical drive. The support CD contains the
original BIOS for this motherboard.
4.
When the BIOS update process is complete, reboot the system.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found.
Reading file “p4p8t.rom”. Completed.
Start flashing...
DO NOT shutdown or reset the system while updating the BIOS! Doing
so may cause system boot failure!
The system automatically checks the CD-ROM if there is no floppy disk
found in the drive.
The recovered BIOS may not be the latest BIOS version for this
motherboard. Visit the ASUS website (www.asus.com) to download the
latest BIOS file.