Armasight DAMBIT05X05PAL1 BIT 5x Digital Night Vision Monocular - Manual (Page 23)

23
3.2 CONTROLS AND DISPLAY INDICATIONS
3.2.1 BIT CONTROLS
The Bit controls are shown in Figure 3-10 and are defined in Table 3-1. The ITEM NO. columns of the
tables indicate the number used to identify items in the figures.
1
2
3
4
FIGURE 3-10. BIT CONTROLS
5
6
CAUTION:
DO NOT force the equipment controls past their stopping points.
TABLE 3-1. CONTROLS AND INDICATORS
ITEM NO. CONTROL/INDICATOR FUNCTION
1 Eyepiece Focus Ring Adjusts the eyepiece diopter. The total diopter adjustment range is
covered with 2 turns of the ring.
2 Turn-pull Switch Activates the Bit when turned to ON.
NOTE:
You must pull the knob before turning in order to activate either
ON or STB.
Activates standby mode when turned to STB (see note above).
Deactivates the Bit when turned to OFF.
3 Display Brightness
Decrease Button
Push the button (3) to decrease the screen brightness.
4 Display Brightness
Increase Button
Push the button (4) to increase the screen brightness.
5 Objective Focus Ring Focuses the objective lens. Adjusts for sharpest view of the scene.
The total focus range is covered with three quarter turns of the lens.
6 Remote Control Button Activates/deactivates the Bit in standby mode. To turn the unit on,
press button once, to turn it off – press button again.
— Battery Status Indicator
(a battery icon on the
the display) * The light gray bar in the battery icon indicates the current power
level of the internal battery, or remaining battery life.
The totally shaded battery icon indicates the fully charged battery.
The flashing transparent battery icon indicates a low battery.
* The Battery Status Indicator not show a correct power level when the external battery or power supply is
used.