H-5223 – Xylem H-5223 User Manual
Page 49
![background image](/manuals/310820/49/background.png)
P - Setup from PC File
This option is used to setup the H-5223 from a file previously stored on the PC.
R - Reset Defaults
This option will reset all of the H-5223 user definable options back to the factory default values.
U - Update Firmware
This option is used when loading new firmware into the H-5223. When this option is used follow
the instructions on the screen and in any readme type of files provided with the new firmware.
New firmware will be available as needed from the web page, www.waterlog.com.
NOTE:
Be sure to save your data and a configuration file before loading new firmware into
the unit. After the unit is updated with the new firmware it is best to reset all
options back to the factory defaults, then load back in the old configuration file.
The time and date will also need to be checked as they will normally be reset in
this process.
H-5223
Remote Operation (Menu Mode) 3-27
- H-2191
- H-223
- H-264
- H-310
- H-312
- H-3301
- H-3342
- H-335
- H-339
- H-340-CalKit
- H-340
- H-340SDI
- H-3521
- H-3531 FlashLite
- H-3551
- H-3553
- H-375 04101 WIND MONITOR-JR
- H-4161
- H-4191
- H-424MS V1.0
- H-424MS V1.1
- H-4271
- H-4280
- H-4400
- H-4401
- STORM 3 UPGRADE
- System 5000 BASIC Manual
- System 5000 User Manual
- DH-21
- BrazedPlate Heat Exchangers
- Heat Exchangers
- GL500 MULTICHANNEL DATA LOGGER
- 4046 ANALOG TO SDI-12 CONVERTER
- 4015 SDI-12 TO ANALOG CONVERTER
- iRIS-CAM Wastewater Security Camera
- SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300
- iRIS 150 GPRS DATALOGGERS
- iCE3 GPRS Variant
- GL500-2-1 Data Logger
- 3101 CONDUCTIVITY CONTROLLER
- 3675 pH CONTROLLER
- 378 TEMPERATURE CONTROLLER
- Expert 1400
- Expert 700
- Expert 7060_7070_Modbus
- Palmer & Bowlus flumes
- Parshall flumes
- Flow Converter 713
- MagFlux IP 68 Protection
- Magflux Electromagnetic Flow Meter
- MagFlux Day flow logger function
- Oxix Calibration
- Oxix Dissolved Oxygen Transmitter
- SuSix Sensor with Wiper - Wiper and Gasket Replacement Kit 206355
- SuSix Sensor with Wiper - Wiper and Gasket Replacement Kit 206356
- SuSix Turbidity and Suspended Solids Transmitter
- PHIX COMPACT pH and Redox Transmitter
- 701 PUMP CONTROLLER
- 712 PUMP CONTROLLER
- 704 PUMP CONTROLLER
- MY CONNECT Quick Guide
- MY CONNECT HMI display
- CONNECT Quick Guide
- CHATTER Base System install guide
- CHATTER Notification System configuration guide
- CHATTER Notification System install guide
- CHATTER RTU and E-mail
- CHATTER Base System Setup Tool Users Guide
- CHATTER Hardware Manual
- 531-532-533 DIGITAL INDICATORS
- 780 LIQUID SAMPLER
- 205546 Modbus Communication Modules for Displays
- 205547 Profibus Communication Modules
- 703 PUMP CONTROLLER
- Expert 800-900
- 702 MJK Comtroller
- 795 MJK Data Transmitter
- 795 II MJK Data Transmitter - GSM Modem
- SDI-12 RADAR
- STORM Central
- STORM 3 Basic Programming manual
- STORM 3 Getting Started Guide
- System 5000 Getting Started Guide
- XL-BASIC Programming Guide
- XL Series H-350XL
- CXA000 12 SWING SAMPLERS
- SP250 QUICK RELEASE WATER SAMPLER
- WS700 COMPOSITE/DISCRETE WATER SAMPLER
- WS700R REFRIGERATED WASTEWATER SAMPLER
- WS755 IMPROVED WASTEWATER/STORMWATER SAMPLER
- WS705 IMPROVED COMPOSITE/DISCRETE WATER SAMPLER
- WS750 WASTEWATER/STORMWATER SAMPLER
- RG600 TIPPING BUCKET RAIN GAUGE, 8 INCH
- RG700 4-20 mA Output Module
- RG200 RAIN GAUGE, 6 inch (TIPPING BUCKET)
- WE Sensor
- SP101 Solar Panel
- WE800 Weather Station
- SIT65 SATELLITE INTERNET TELEMETRY
- WIND ALARM CONTROLLER
- Expert MJK 1100-2100-3100
- 501 Electrode Control
- MJK 713 Open Channel Flowmeter