Xylem CHATTER Notification System configuration guide - Manual (Page 38)

MANUAL
GB CHATTER NOTIFICATION CONFIGURATION 1303
38
Example:
<cnsMaxEventLogInterval>
60
</cnsMaxEventLogInterval>
Key Description
cnsInitialHighTimeout This key contains the minimum time the measured level from the actual MJK
above the threshold before it is considered a valid
stormflow
The value is a number of seconds, the default value is 300, equal to 5 minutes
Example:
<cnsInitialHighTimeout>
300
</cnsInitialHighTimeout>
Key Description
cnsEndingLowTimeout This key contains the minimum time the measured level from the actual MJK
below the threshold again before it is considered
a valid stormflow
The value is a number of seconds, the default value is 300, equal to 5 minutes
Example:
<cnsEndingLowTimeout>
300
</cnsEndingLowTimeout>
The supplied configuration file
<cnsConfig>
<cnsVersion>
003
</cnsVersion>
<cnsDeleteOldRecords>
0
</cnsDeleteOldRecords>
<cnsMaxEventLogInterval>
60
</cnsMaxEventLogInterval>
<cnsInitialHighTimeout>
60
</cnsInitialHighTimeout>
<cnsEndingLowTimeout>
60
</cnsEndingLowTimeout>
</cnsConfig>