Command/response table for sis commands, Command/response table for sis commands -6, Programmer’s guide – Extron Electronics MTPX Series User Guide User Manual
Page 86: Preliminar y, Programmer’s guide, cont’d
Programmer’s Guide, cont’d
MTPX Twisted Pair Matrix Switchers • Programmer’s Guide
4-6
PRELIMINAR
Y
Command
ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).
N
The & tie command for RGB and the % tie command for video can be used interchangeably on the matrix switchers.
Tie input
X!
to output
X@
,
video (V) and audio (A)
X!
*
X@
!
Out
X@
•
In
X!
•
All
]
Tie input
X!
‘s video and
audio to output
X@
.
Example:
1*3!
Out03
•
In01
•
All
]
Tie input 1 video and audio
to output 3.
Tie input
X!
to output
X@
,
RGB (video) only
X!
*
X@
&
Out
X@
•
In
X!
•
RGB
]
Audio breakaway.
Example
(see 2nd Note, above):
10*4&
Out04
•
In10
•
RGB
]
Tie input 10 RGB to output 4.
Tie input
X!
to output
X@
,
video only
X!
*
X@
%
Out
X@
•
In
X!
•
Vid
]
Audio breakaway.
Example
(see 2nd Note, above):
7*5%
Out05
•
In07
•
Vid
]
Tie input 7 video to output 5.
Tie input
X!
to output
X@
,
audio only
X!
*
X@
$
Out
X@
•
In
X!
•
Aud
]
Audio breakaway.
Example:
12*4$
Out04
•
In12
•
Aud
]
Tie input 12 audio to output 4.
Quick multiple tie
E
+Q
X!
*
X@
!...
X!
*
X@
$
}
Qik
]
Example:
E
+Q3*4!3*5%3*6$
}
Qik
]
Tie input 3 video and audio
to output 4, tie input 3 video
to output 5, and tie input 3
audio to output 6.
Tie input to all outputs,
V & A
X!
*!
In
X!
•
All
]
Example:
5*!
In05
•
All
]
Tie input 5 video and audio
to all outputs.
Tie input to all outputs,
RGB (video) only
X!
*&
In
X!
•
RGB
]
Audio breakaway.
Example
(see 2nd Note, above):
8*&
In08
•
RGB
]
Tie input 8 video to all
outputs.
Tie input to all outputs,
video only
X!
*%
In
X!
•
Vid
]
Audio breakaway.
Example
(see 2nd Note, above):
10*%
In10
•
Vid
]
Tie input 10 video to all
outputs.
Tie input to all outputs,
audio only
X!
*$
In
X!
•
Aud
]
Audio breakaway.
Read ties
N
The & read tie command for RGB and the % read tie command for video can be used interchangeably on the matrix
switchers.
Read RGB (video) output
tie
X@
&
X!]
Video input
X!
is tied to
output
X@
.
Read video output tie
X@
%
X!]
Video input
X!
is tied to
output
X@
.
Read audio output tie
X@
$
X!]
Audio input
X!
is tied to
output
X@
.
Command/response table for SIS commands
N
X!
= Input number
00 – (maximum number of inputs for your model) (00 = untied)
X@
= Output number
01 – (maximum number of outputs for your model)