Gotham 6 AFLP Low Profile Cross Baffle SpecSheet SpecSheet User Manual
6” aflp
Luminaire Type:
Catalog Number
(autopopulated):
© 2010-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 10/07/13. Specifications subject to change without notice.
PAGE 1 OF 3
AFLP-6-XBAFFLE
Gotham Architectural Downlighting
Compact Fluorescent Downlights
6” AFLP
Low Profile
Cross Baffle
Horizontal DTT or TRT lamp
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
OPTICAL SYSTEM
•
Anodized aluminum upper reflector with fluted lamp chamber provides high
efficiency and an evenly illuminated aperture appearance.
•
Available with clear glass lens (CGL), tempered prismatic lens (T73), Solite lens
(SOL), flat opal lens (FOL), or prismatic polycarbonate lens (PPC).
•
Semi-specular regressed door with cross baffle insert.
•
Door is retained by self-aligning, torsion support springs, preventing gaps
between door and ceiling.
MECHANICAL SYSTEM
•
16-gauge galvanized steel mounting/plaster frame. Maximum 1-1/4” ceiling
thickness.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Post-installation adjustment possible without
the use of tools from above or below ceiling.
•
Galvanized steel junction box with hinged access covers and spring latch. Two
combination 1/2”-3/4” and three 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
•
Low-profile design allows for 4-3/8” fixture depth above ceiling.
ELECTRICAL SYSTEM
•
Galvanized steel lampholder housing.
•
Horizontally mounted, four-pin, positive-latch, thermoplastic socket(s).
•
Class P, thermally protected, high-power-factor electronic ballast(s) mounted to
the junction box.
•
SIMPLY5™ technology available.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: AFLP 1/26TRT 6CB SOL MVOLT
Series
Wattage/Lamp
Aperture/Trim color
Lens type
Voltage
Ballast
2
AFLP
1/13DTT
1/18DTT
1/26DTT
1/13TRT
1/18TRT
1/26TRT
1/32TRT
1/42TRT
6CB
Cross baffle
(blank) No lens
CGL
Clear glass lens
T73
Tempered prismatic lens
SOL
Solite lens
FOL
Flat opal lens
PPC
Prismatic polycarbonate lens
MVOLT
1
120
277
347
(blank)
Electronic ballast
ECOS
1, 3
EcoSystem
®
electronic dimming ballast.
Minimum dimming level 5%
ADEZ
3, 4
Advance Mark 10
®
electronic dimming
ballast. Minimum dimming level 5%
ADZT
3, 4
Advance Mark 7
®
electronic dimming bal-
last. Minimum dimming level 5%
S5
5
SIMPLY5™ system ballast. Minimum
dimming level 15%
Options
ELR
6
Emergency battery pack, remote test switch
ELRHL
6
High lumen output emergency battery pack, remote test switch provided
GMF
4
Single, slow-blow fuse
GLR
4
Single, fast-blow fuse
TRW
White painted flange
TRBL
Black painted flange
DS
Dual switching
CP
7
Chicago plenum
WLP
With 3500 K lamp (shipped separately)
WL
Wet location
HW
Hardwire for S5 system; replaces RELOC
®
NEPP
Interface for Sensor Switch
®
nLight
®
network with integral power supply. Refer to TN-632-01.
WRL
8
Wattage restriction label