NXG Technology NX-HDMIX-WP-IR-50 - HDMI over dual Cat5e/6/7 - Manual

NX-HDMIX-WP-IR-50
HDMI Wall Plate Extender
DEAR CUSTOMER
Thank you for purchasing this NXG product. For optimum performance and safety, please
read these instructions carefully before connecting or operating this product. Please keep
this manual in a safe place for future reference.
FEATURES
• Includes one transmitter and one receiver fitting North American Decora ™ wall plate sizes.
• The product operates using Dual UTP cable (Cat5E/6) as a substitute to expensive long HDMI
cable runs. The RJ45 connections must follow the IEEE-568B standard.
• Transmission distance reaches up to 50 meters (165’) at 1080P
• Automatic feedback, equalization and amplification adjustments
• Signal rates up to 2.25Gbits in support of 1080P
• Pass through infrared control signals for the remote source
• DC5V Power Supply for receiver (RX)
NOTICE
NXG Technology reserves the right to make changes
in the hardware, packaging and any accompanying
documentation without prior written notice.
PACKING CONTENTS
1) Main Unit. HDMI Wall Plate
2) DC5V Power Supply for receiver
3) Operating Instructions
4) IR TX unit (IR emitter cable)
5) IR RX unit (IR receiver cable)
4 1
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
568B
TABLE OF CONTENTS
Packing Contents
Specifications
Connections
Connecting and Operating
Typical Application
Maintenance
Product Service
Warranty
WARRANTY
NXG products are designed to the highest possible value and performance standards. Our
confidence in their quality is such that NXG Technology offers customers this transferable
limited warranty:
NXG Products Two-Year Limited Warranty
If the NXG products prove to be defective in workmanship or materials within two years from
the date of the original customer’s purchase, we will, at our option, repair or replace the defec-
tive products.
DISCLAIMER
THE WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER LIA-
BILITIES AND OBLIGATIONS OF NXG TECHNOLOGY, ALL OF WHICH ARE EXPRESSLY DISCLAIMED.
NXG TECHNOLOGY HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION,
WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION, QUALITY, DURABILITY, DESIGN,
OPERATION, CAPACITY, FITNESS FOR USE OR SUITABILITY OF THE NXG PRODUCT.
Exclusion of Certain Damages
NXG Technology’s liability for any defective product is limited to repair or replacement of prod-
uct at our option. NXG Technology shall not be liable for incidental or consequential damages
of any kind or character because of product defects. Some states do not allow limitations on
how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations and exclusions may not apply.
This Warranty Does Not Cover:
• Damage caused by abuse, accident, misuse, negligence, or improper operation.
• Any product whose serial number has been altered, defaced, or removed.
• Products that have been altered or modified.
• Normal wear and maintenance.
• Damages caused by shipping. (All claims for shipping damage must be made with the carrier.)
Warranty Service
Warranty service must be performed by an authorized
service center, usually an NXG dealer or its authorized
agent. All warranty repairs must be accompanied by
the original bill of sales. No other document is accept-
able or is required. This warranty gives you specific
legal rights, and you may also have other rights which
vary from state to state.
Scottsdale, AZ
email: [email protected]
web: nxgtechnology.com