NXG Technology NX-VCH8 - Volume Control Distribution Hub User Manual

Introduction, Features and benefits, Mounting and wiring instructions

Advertising
background image

Congratulations on choosing the NX-VCH8 Volume Control Distribution Hub. Like all NXG products, great care has been taken in its design.

We hope the combination of advanced engineering and state-of-the-art materials will provide you with a lifetime of listening pleasure.

Introduction

The NX-VCH8 is a stereo (two channel), one input, eight output, broad frequency response, volume control distribution hub. The NX-VCH8

provides a simple solution in complex speaker installations providing an easy way to connect from two to eight volume controls and pairs of

stereo speakers to a single stereo receiver/amplifier. All outputs are labeled easing both connection and troubleshooting of a system.

WARNING: THE NX-VCH8 DOES NOT PROVIDE INTERNAL IMPEDANCE CORRECTION. YOU MUST USE IMPEDANCE MATCHING

TYPE VOLUME CONTROLS TO PROVIDE AMPLIFIER PROTECTION SUCH AS THE NXG NX-VM80 OR NX-VMS100.

Features and Benefits

• Designed for use with

Class 2 wiring

• Parallel connecting block

for use with Impedance

matching volume controls

• One Stereo Input, eight

stereo outputs

• Detachable connectors for

easy wiring

• Compact size fits standard

structured wiring panels

• Heavy-duty PC mounted

screw-type connectors,

capable of accepting up to

14 AWG wire, provide solid

hookup to input and output

wires.

• Isolated left/right circuit

grounds provide safe

connection for amplifiers

with floating grounds

or bridged configuration.

• High quality, heavy-duty

construction throughout

provides excellent reliability.

• Intelligent design allows

simple installation, easy

connection, and trouble

free operation.

Mounting and

Wiring Instructions

1. The NX-VCH8 is designed to

be mounted in a structured

wiring panel or surface mounted

in a central location where all

your wires are routed (typically in a basement, utility room, or attic). Secure the NX-VCH8 to a wall or panel using the two mounting

holes on each end of the unit. Fig. 1 shows a typical layout for 8 stereo speakers with impedance matching volume controls for a typical

home system.

NX-VCH8 Volume Control Distribution Hub

OWNER’S MANUAL

Receiver/Amplifier

Impedance

Matching Type

Volume Controls

Typical Speakers

NX-VCH8

Fig. 1

(Continued on reverse)

Advertising