CEMB USA C61 (D) - Manual (Page 11)

I 0184 - 11 GB
5.3 - RECALCULATION OF THE UNBALANCE
Press after new setting of the measurement.
After performing a balancing spin, the amounts of unbalance are shown on the digital readouts.
Digital readouts with LED ‘s 3 - 4 lit up indicate the correct angular wheel position to mount the counte-
rweights (12 o’clock position). If the audible alarm is enabled (see
FUNCTION MENU MANAGEMENT),
the acquisition of the correction position sounds with a “beep” alarm.
In the event of unbalance less than the selected threshold value , is displayed in place of the
unbalance value , with it is possible to read the values below the selected threshold gr. by gr.
5.4 - MEASUREMENT RESULT
Fig. 10
Inside correction Outside correction