Hydrotech AP1 (115V) Air Pump & Retention Tank Kit - Manual (Page 2)

1
Air Pump Models AP1 & AP2
IMPORTANT: PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND INSTALLING THE AIR PUMP.
Consult local plumbing and electrical codes.
The Air Pump can introduce air at any point in your filtering sequence.
PLEASE BE ADVISED A VERSION OF THIS MANUAL IS ALSO INCLUDED WITH THE AIR PUMP.
THE AIR PUMP MANUAL INCLUDES ADDITIONAL INFORMATION FOR OTHER CONFIGURATIONS.
TYPICAL INSTALLATION
Performance and Specifications
OPERATING CONDITIONS: The Air Pump is water resistant, NOT water proof. The pump can operate with some room moisture, but should not be
exposed to rain or very wet conditions. The Air Pump should not be used outdoors. The pump can withstand temperatures from 40° to 100° F as long
as there is not a great amount of moisture. Humid locations should use air dryers to prevent moisture accumulation in pump.
Item Model Retention Maximum Maximum
Number Number Electrical Tank Size Pressure Temperature
978003 AP1 115V / 1 ph / 60 Hz 9” x 48” (229mm x 1219mm) 75 psi (518 kPa) 100°F (38°C)
978004 AP2 230V / 1 ph / 60 Hz 9” x 48” (229mm x 1219mm) 75 psi (518 kPa) 100°F (38°C)
978010 Vent Tank Only N/A 9” x 48” (229mm x 1219mm) 75 psi (518 kPa) 100°F (38°C)
Figure 1
PARTS LIST:
a. Air Pump w/ Air Filter
b. Pressure Gauge
c. 1/4” Check Valve (2)
d. Air Regulator Valve (ARV)
e. Poly Tubing (Blue)
f. Tubing Connectors (2)
g. Shelf (1) with Vibration Mounts (3)
h. 9 x 48 Retention Tank
i. 1” FM x 1” FM Check Valve
j. 1” M x 2” sch 80, Nipple
k. 1” x 48” Distributor Tube
l. Vent Head / Diffuser
m. Air Vent
Installation Instructions
Identify all parts before assembling.