Magnum Venus Plastech INNOVATOR PRO 5000 (8003) - Manual (Page 30)

MAGNUM VENUS PLASTECH Innovator Pro Manual 30
Control Box Configuration:
The user can adjust the flush timer duration, the MPG response time and RGA
stroke timer and alarm volume. Use the air circuit for your machine controls to
identify the location of the components that require adjustment. A copy of the air
circuit is supplied with each machine and can be located inside the control box.
Many components in the control box are labeled to aid identification and
therefore locating items that may require adjustment should be relatively straight
forward with the aid of a circuit diagram.
The internals of a typical Pro Innovator control box are shown in figures 9 & 10.
Some components have been marked for illustrative purposes; however it must
be emphasized that the appropriate air circuit should always be used as the
definitive reference.
Figure 9 – Box Lid Internals
RGA - Subassembly PDC – Pre Determined counter
RGA -Timer
Pump Regulator
Sub-assembly OR (Shuttle) Valve E-Stop Sub-assembly